CALL ALERT(300/Boiler temperatuur) WITH 2BYTE(400/current boiler temperature)
#Op de plek van de tekst tussen de haakjes moet in de script editor het juiste component worden geselecteerd.

​​WAIT BYTE(01/Uitschakelvertraging) MIN
SET BIT(02/Lamp) TO 0

​​WAIT 30 MIN
SET BIT(02/Lamp) TO 0

$INSTELLUX = 2BYTE(109/LUXwaardeinstellen)
IF 2BYTE(110/LUXsensor⟨huidigeluxwaarde⟩)>2BYTE(109/LUXwaardeinstellen)
 BEGIN
  # zonwering dicht
  SET BIT(1/Zonwering) TO 1
  WAIT 5 MIN
 END
IF 2BYTE(110/LUXsensor⟨huidigeluxwaarde⟩)<(2BYTE(109/LUXwaardeinstellen)*0.9)
# *0.9 zorgt ervoor dat er een marge zit van 10% voor hysteresis. Deze kan ook kleiner worden ingesteld als het zonnescherm nog te vaak heen en weer gaat, *0.8 of * 0.7 bijvoorbeeld.
 BEGIN
  # zonwering open
  SET BIT(1/Zonwering) TO 0
  WAIT 5 MIN
 END</code>

WAIT 2 MIN
SET 2BYTE(109/LUXwaarde instellen) TO $INSTELLUX
#Dit zorgt ervoor dat de ingestelde waarde uit de app ook beschikbaar is na stroomuitval.

Introductie

De voorbereiding

Stap 1

Stap 2

IF BYTE (16/Radio zender kiezen)=0
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) STOP
IF BYTE (16/Radio zender kiezen)=1
BEGIN
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) SOURCEURI aac://icecast.omroep.nl/radio4-bb-aac
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) PLAY
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) UNMUTE
END
IF BYTE( 16/Radio zender kiezen)=2
BEGIN
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) SOURCEURI aac://8633.live.streamtheworld.com:80/VERONICAAAC_SC
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) PLAY
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) UNMUTE
END
IF BYTE (16/Radio zender kiezen)=3
BEGIN
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) SOURCEURI aac://icecast.omroep.nl/3fm-bb-aac
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) PLAY
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) UNMUTE
END

Stap 3

Stap 4

#Script 1 for starting the simulation
#This script turns two schedulers ON which start scripts 3 and 4 (in the morning and evening).
#But only if there has not been anyone at home for more than 6 hours...
WAIT 6 HOUR
SET SCHEDULER(21/Presence morning) TO 1
SET SCHEDULER(22/Presence evening) TO 1
#You could use a trigger on the 'all off' near the front door to start this script or a trigger on a contact of the burglar alarm, so the script is started when the alarm is turn on.

#Script 2 for stopping the simulation
#This script turns the schedulers off and stops the starting script.
SET SCHEDULER(21/Presence morning) TO 0
SET SCHEDULER(22/Presence evening) TO 0
STOP SCRIPT(1/Start presence simulation)
STOP SCRIPT(3/Morning simulation)
STOP SCRIPT(4/Evening simulation)
#You could use a presence detector to execute this script, or trigger it when the burglar alarm is turned off.

#Script 3 the simulation itself for the morning
WAIT 0 RANDOM 30 MIN
#First we wait for a random time, so every day the time the simulation start is a little different.
SET BYTE(25/Bedroom wall light) TO 50
SET BIT(23/Hallway) TO 1
WAIT 5 MIN
SET BYTE(11/Kitchen light) TO 80
WAIT 15 MIN RANDOM 10 MIN
SET BYTE(25/Bedroom wall light) TO 0
SET BYTE(14/Living room spots) TO 80
SET BIT(80/Curtains) TO 0
WAIT 20 MIN RANDOM 20 MIN
SET BIT(23/Hallway) TO 0
SET BYTE(11/Kitchen light) TO 0
SET BYTE(14/Living room spots) TO 0

#Script 4 the simulation for the evening
WAIT 0 RANDOM 1 HOUR
#First we wait for a random time, so every day the time the simulation start is a little different.
SET BYTE(11/Kitchen light) TO 70
SET BIT(23/Hallway) TO 1
SET BYTE(14/Living room spots) TO 80
WAIT 30 MIN RANDOM 30 MIN
SET BYTE(11/Kitchen light) TO 0
SET BYTE(14/Living room spots) TO 70
SET BYTE(24/Living room standing) TO 40
WAIT 1 HOUR RANDOM 1 HOUR
SET BIT(80/Curtains) TO 1
SET BYTE(25/Bedroom wall light) TO 70
SET BYTE(14/Living room spots) TO 50
WAIT 1 HOUR RANDOM 1 HOUR
SET BIT(23/Hallway) TO 0
SET BYTE(24/Living room standing) TO 0
SET BYTE(14/Living room spots) TO 0
WAIT 5 MIN
SET BYTE(25/Bedroom wall light) TO 0

Example 2b: Fading RGB lights 2
#Example for fading RGB lights 2
#This example fades between 3 colours that can be set with an iOS or Android device and the speed is a    dimmer value which can also be altered on the device.
FADE RGB(505/Colour wall) TO RGB(501/RGB colour1) IN BYTE(500,RGB fade speed)
SEC STEP 100
FADE RGB(505/Colour wall) TO RGB(502/RGB colour2) IN BYTE(500,RGB fade speed)
SEC STEP 100
FADE RGB(505/Colour wall) TO RGB(503/RGB colour3) IN BYTE(500,RGB fade speed)
SEC STEP 100
RESTART
#You can use a trigger or a scenario to start or stop this script
#For example, start this script with a scenario and stop it with the Room Off button (trigger)

Stap 1

Stap 2

IF BIT(13/Sonos aan-uit)=1
BEGIN
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) SOURCEURI aac://icecast.omroep.nl/radio4-bb-aac
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) PLAY
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) UNMUTE
END
ELSE
EXECUTE ON UPNPDEVICE (UPNPUUID:RINCON_000E5886D5B601400_MR§/Woonkamer - Sonos PLAY:5 Media Renderer) STOP

Stap 3

Stap 4